Saramonic | SKU: WITALK-CB
WiTalk-BP Rechargeable Battery for WiTalk Wireless Intercom Headsets and WiTalk-Hub Base Station
SKU: WITALK-BP | FREE U.S. shipping on all orders over $100!
$25.00
- Quick-change battery for the WiTalk Wireless Intercom Headsets and Hub Intercom Base Station
- Provides up to 18-hours of power to WiTalk DRH and SRH Remote Headsets
- Provides 5 to 10-hours of power to WiTalk DMH and SMH Master Headsets (5 with 4 remotes / 10 with 2 remotes)
- Provides 2.5 to 5-hours of power to WiTalk-Hub Base Station (2.5 with 8 remotes / 5 with 4 remotes)
- Can be charged in the WiTalk Headsets and Hub via USB-C or in 10-Bay WiTalk-CB Battery Charger
Overview
The Saramonic WiTalk-BP is quick-change battery designed for the Saramonic WiTalk Wireless Intercom Headsets and the WiTalk-Hub Intercom Base Station. It features 1200mAh of power and can either be charged directly in the WiTalk Headsets and Hub via USB-C DC power or can be charged in the 10-Bay WiTalk-CB Battery Charger (sold separately).
Quick-Change Power You Can Rely On
The WiTalk-BP provides 1200mAh of power to your WiTalk components. A full charge gives you an incredible runtime of up to 18-hours on the DRH and SRH remote headsets, 5 to 10 hours on the DMH and SMH master headsets, and 2.5 to 5 hours for the Hub Base Station. The battery is easy to change, with a single button push to eject and can be charged in the headsets or Hub via USB-C power, even while in use.
Item Includes
1 x WiTalk-BP 1200mAh Rechargeable Battery
Specifications
RX Receiver
Display: OLED
Reception Type: 2.4GHz Digital Frequency
Modulation: GFSK
Operating Range: Up to 492.1' (150m) Without Obstacles
RF Output Power: <13mW
Frequency Response 20Hz to 20KHz
Digital Resolution: 24-Bit/48kHz
Signal-to-Noise Ratio: >80dB
Distortion: <0.1%
Analog Audio Output: 3.5mm TRS
Digital Audio Outputs: USB-C and MFi Certified Lightning (via connection adapters)
Output Mode Types: Mono / Stereo / Safety (Mono)
Headphone Output Connector: 3.5mm TRS
Selectable Low-Cut Filter: 75Hz & 150Hz
System’s Voice Delay: ≤25ms
OLED Screen Resolution: 128 x 80 pixels
Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
Battery Life: Approximately 16-hours
Charging Time: Approximately 1.5-hours
Battery Specifications: 3.7V / 400mAh
Weight: 1.06oz (30g)
Dimensions: 1.94 x 1.48 x 0.74” (49.5 × 37.5 × 18.8mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)
TX Transmitter
Transmission Type: 2.4GHz Digital Frequency
Modulation: GFSK
Operating Range: Up to 492.1' (150m) Without Obstacles
RF Output Power: <13mW
Frequency Response 20Hz to 20KHz
Reference Audio Input Level: -30~-42dBv (Mic input, 0dB Attenuation)
Digital Resolution: 24-Bit/48kHz
Microphone Polar Pattern: Omnidirectional
Microphone Maximum SPL: 120dB
Microphone Sensitivity: 40±2dB (1V/pa)
Signal-to-Noise Ratio: >80dB
Distortion: <0.10%
Other Functions: 2-Stage Noise Reduction & Tactile Microphone Mute Buttons
Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
Battery Life Recording On: Approximately 20-hours
Charging Time: Approximately 1.5-hours
Battery Specifications: 3.7V / 190mAh
Weight: 0.81oz (23g)
Dimensions: 1.77 x 1.24 x 0.51” (45 × 31.6 × 13mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)
Charging Case
Power Requirements: Powered by USB-C Charging Port (DC 5V)
Power Capacity: 1250mAh
System Charging Time: Approximately 2-hours
Case Charging Time: Approximately 2.5-hours
Charge Cycles for Transmitters and Receiver: Approximately 1.6 Times
Weight: 4.97oz (141g)
Dimensions: 4.67 x 2.21 x 2.45” (118.6 x 56.2 x 62.3mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)
