Saramonic | SKU: SR-SC2500

SKU: UTC-C35 | FREE U.S. shipping on all orders over $100!
The Saramonic UTC-C35 is a high-quality signal converter that allows you to record stereo or mono analog audio to your digital USB-C devices from most microphones, mixers, or audio adapters with a 3.5mm output.
Ideal for recording the output of wireless microphone receivers, audio mixers, and other analog audio into your Phone 15, Android Smartphone or Tablet, newer iPad, Computer, and much more.
Designed for the locking 3.5mm output of the Saramonic UwMic9, VmicLink5, UwMic10 and UwMic15 wireless systems and the Saramonic Lavmic, it also works with the Saramonic SR-WM4C, Audio Adapters, Mixers, Wired Microphones (like the Vmic), or just about any audio device with a standard 3.5mm output.
It is tangle free, compact, lightweight, and easy to be carried around as a perfect audio recording solution for USB-C devices.
Designed for the locking 3.5mm output of the Saramonic UwMic9, VmicLink5, UwMic10 and UwMic15 wireless systems and the Saramonic Lavmic, it also works with the Saramonic SR-WM4C, Audio Adapters, Mixers, Wired Microphones (like the Vmic), or just about any audio device with a standard 3.5mm output.
1 x UTC-C35 Cable
RXDi Receiver Specifications:
Reception Type: 2.4GHz Digital Frequency
Modulation: Digital Modulation
Antenna: Built-In Antenna
Operating Range (Without Obstacles): Up to 328' (100m)
Digital Output Connector: MFi Certified Lightning Male Connector
Output Mode Types: Mono / Stereo
Headphone Output Connector: 3.5mm TRS
Frequency Response 20Hz to 20KHz
Digital Signal Resolution: 16bit / 48kHz
Signal-to-Noise Ratio: ≥84dB
Distortion: ≤0.1%
System’s Voice Delay: ≤8ms
Power Requirements: Powered by iOS Device
Weight: 0.58oz (16.5g)
Dimensions: 3.23 x 0.87 x 0.47” (82 x 22 x 12mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)
TX Transmitter Specifications:
Transmission Type: 2.4GHz Digital Frequency
Modulation: Digital Modulation
Antenna: Built-In FPC Antenna
Operating Range (Without Obstacles): Up to 328' (100m)
RF Output Power: <10mW
Frequency Response 20Hz to 20KHz
Reference Audio Input Level: -20~-42dBv (MIC input, 0dB Attenuation)
Input Connector: 3.5mm Mic In / Line In (Mic with Plug-in-Power)
Built-in Microphone Polar Pattern: Omnidirectional
Built-in Microphone Maximum SPL: 106dB
Built-in Microphone Sensitivity: 39±2dB (Tested at 2V 2.2KΩ)
Lavalier Microphone Maximum SPL: 120dB
Lavalier Microphone Sensitivity: 39+/-2dB (0dB=1V/Pa,1kHz)
Digital Signal Resolution: 16bit / 48kHz
Signal-to-Noise Ratio: ≥84dB
Distortion: ≤0.1%
High-contrast OLED Screen Resolution: 128 x 64 pixels
Other Functions: Tactile Microphone Mute Function
Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
Battery Life: Approximately 10-hours
Battery Specifications: 3.7V / 400mAh
Weight: 1.04oz (29.5g)
Dimensions: 2.2 x 1.49 x 0.61” (56 × 38 × 15.5mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)
SR-M1 Lavalier Specifications:
Acoustic Principle: Electret Condenser
Polar Pattern: Omnidirectional
Connector: 3.5mm
Cable Length: 4.1’ (1.25m)
Maximum SPL: 110dB
Sensitivity: -39dB+/-2dB(0dB=1V/Pa,1kHz)
Signal-to-Noise Ratio: ≥60dB
THD: <1% (94dB SPL at 1kHz)
Power Requirements: Plug-in-Power (1V~10V)
Standard Operating Voltage: 3V
Current Consumption: <500μA
Output Impedance: <2.2KΩ
Blink 500 ProX B4 Charging Case Specifications:
Power Requirements: Powered by USB-C port
Power Capacity: 3000mAh
System Charging Time: Approximately 2-hours
Case Charging Time: Approximately 2.5-hours
Charge Cycles for Transmitters: Approximately 3.75 Times
Weight: 9.49oz (269g)
Dimensions: 6.54 x 3.92 x 1.51” (166 x 99.5 x 39mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)