UTC-C35 Locking 3.5mm TRS Male to USB-C Out Cable w/ A-to-D for iPhone 15, Android, Computers, iPad

SKU: UTC-C35 | FREE U.S. shipping on all orders over $100!

$49.00

High-Quality Digital Signal Converter for Stereo and Mono Analog Audio to USB-C for Phone 15, Android Smartphones or Tablets, newer iPads, Computers and much more
Records Mono or Stereo Audio into your USB-C Device
Reliable and Professional Audio Quality with Dedicated A-to-D Converter
Works with Virtually Any Analog Audio Device with a standard 3.5mm Output in to a USB-C Device
Compact, Lightweight, Tangle Free and Easy-to-Use

Overview

The Saramonic UTC-C35 is a high-quality signal converter that allows you to record stereo or mono analog audio to your digital USB-C devices from most microphones, mixers, or audio adapters with a 3.5mm output.

Ideal for recording the output of wireless microphone receivers, audio mixers, and other analog audio into your Phone 15, Android Smartphone or Tablet, newer iPad, Computer, and much more.

Designed for the locking 3.5mm output of the Saramonic UwMic9, VmicLink5, UwMic10 and UwMic15 wireless systems and the Saramonic Lavmic, it also works with the Saramonic SR-WM4C, Audio Adapters, Mixers, Wired Microphones (like the Vmic), or just about any audio device with a standard 3.5mm output.

It is tangle free, compact, lightweight, and easy to be carried around as a perfect audio recording solution for USB-C devices.

Item Includes

1 x UTC-C35 Cable

Specifications

RX Receiver
Display: OLED
Reception Type: 2.4GHz Digital Frequency
Modulation: GFSK
Operating Range: Up to 492.1' (150m) Without Obstacles
RF Output Power: <13mW
Frequency Response 20Hz to 20KHz
Digital Resolution: 24-Bit/48kHz
Signal-to-Noise Ratio: >80dB
Distortion: <0.1%
Analog Audio Output: 3.5mm TRS
Digital Audio Outputs: USB-C and MFi Certified Lightning (via connection adapters)
Output Mode Types: Mono / Stereo / Safety (Mono)
Headphone Output Connector: 3.5mm TRS
Selectable Low-Cut Filter: 75Hz & 150Hz
System’s Voice Delay: ≤25ms
OLED Screen Resolution: 128 x 80 pixels
Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
Battery Life: Approximately 16-hours
Charging Time: Approximately 1.5-hours
Battery Specifications: 3.7V / 400mAh
Weight: 1.06oz (30g)
Dimensions: 1.94 x 1.48 x 0.74” (49.5 × 37.5 × 18.8mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)

TX Transmitter
Transmission Type: 2.4GHz Digital Frequency
Modulation: GFSK
Operating Range: Up to 492.1' (150m) Without Obstacles
RF Output Power: <13mW
Frequency Response 20Hz to 20KHz
Reference Audio Input Level: -30~-42dBv (Mic input, 0dB Attenuation)
Digital Resolution: 24-Bit/48kHz
Microphone Polar Pattern: Omnidirectional
Microphone Maximum SPL: 120dB
Microphone Sensitivity: 40±2dB (1V/pa)
Signal-to-Noise Ratio: >80dB
Distortion: <0.10%
Other Functions: 2-Stage Noise Reduction & Tactile Microphone Mute Buttons
Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
Battery Life Recording On: Approximately 20-hours
Charging Time: Approximately 1.5-hours
Battery Specifications: 3.7V / 190mAh
Weight: 0.81oz (23g)
Dimensions: 1.77 x 1.24 x 0.51” (45 × 31.6 × 13mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)

Charging Case
Power Requirements: Powered by USB-C Charging Port (DC 5V)
Power Capacity: 1250mAh
System Charging Time: Approximately 2-hours
Case Charging Time: Approximately 2.5-hours
Charge Cycles for Transmitters and Receiver: Approximately 1.6 Times
Weight: 4.97oz (141g)
Dimensions: 4.67 x 2.21 x 2.45” (118.6 x 56.2 x 62.3mm)
Operating Temperatures: 0° to 122°F (0°C to 50°C)
Storage Temperatures: -50° to 122°F (–10°C to +50°C)